Once you've completed the activation process (see this help article for a walkthrough), please follow the steps below to get your tracker reading properly:
- Make sure the battery on the device is fully charged.
- Next, make sure the device is communicating with us properly. To do this, you will need to reboot the device (turn it completely off, then back on again), click here for more reboot instructions; and make sure the green Cel LED is flashing every 1-2 seconds. See figure for GL300 LED layout:
- Then, take the device for either a 10-minute drive, walk or place it near a window to ensure connection to the satellite network prior to use. When connect the blue GPS LED will go from flashing to a solid color and the green Cel LED will go from a rapid flash to a slower flash (you can learn more about all the lights by following this help article).
- Once you are seeing this LED behavior, the unit should be communicating with us and will be visible on the new Spytec GPS platform.