In order to migrate your Spytec GPS account to the new platform, it is important that your tracker is given the chance to connect to the new system. To do this we need to:
- Make sure the battery on the device is fully charged.
- Make sure the device is communicating with us properly. To do this, you will need to power cycle the device (turn it completely off, then back on again) and make sure the green Cel LED is flashing every 1-2 seconds. See figure for GL300 LED layout:
- Then, take the device for either a 10 minute drive, walk or place it near a window to ensure connection to the satellite network prior to use. When connect the blue GPS LED will go from flashing to a solid color and the green Cel LED will go from a rapid flash to a slower flash.
- Once you are seeing this LED behavior, the unit should be communicating with us and will be visible on the new Spytec GPS platform.