This article includes instructions on how to set the switches for the M4 and M6 extended battery pack. Please note: If your extended battery pack did not come with a switchboard, please click here for more information.
The switch module included with the M4 and M6 battery cases is needed to get the battery pack correctly connected to the GL300 series tracker. The switch positioning for the unit should be as follows :
If you are looking at the module with the LED at the top, all switches should be to the left, away from the body of the module.
This is the proper basic configuration for the unit. Please see the image below:
My battery pack did not come with a switchboard. What should I do?
The most recent version of the M4 and M6 extended battery case has eliminated the switchboard and swapped it for a single connector cable. If you do not have a switchboard, this is okay. Both the switchboard and connector cable operate and function the same with your tracker.